31 Aug 2014

VT500 Ascot - plans plus photosoup

Here's a little fotosoup of my future plans

I made this before I changed my stock ascot.
In the photosoup I shortened the rear seat but now I'm planning to just change the height of the seat a little.
The bike in the picture I found online, that's not mine.

The plan was to make a Jeff Wright x Hidemo x Red Hot Motorcycles custom! Or a superbikers/speedway inspired bike.
or a dessert sled...
Probably a mix of everything. My plans change all the time but whatever it will be it will be very much inspired by low budget amateur racers from the past. That's where the magic happens :)

Dropped the front fork 4 cm, so I'll have more pressure on the front wheel. It felt a little light..
Painted some of the red stuff.
Tried some different handle bars.
Did not like the stock(?) tomaselli bar. To high and I did not like the angle.
Changed it for a classic dirt bike Handlebar.

And found out the front fork has some dents in the chrome...
When I bought the bike it was raining so I looked at the bike under a roof. Not the best light over there... I also missed the the fact that the engine and exhaust pipes where painted probably with a rattle can in a different black than the rest of the bike. Done without removing it from the bike so it has a gradient in black going from the original shiny black to the rattle can matte black.. Yikes!

I made a to do list yesterday:

Mounting the vintage Hella rear light on a new fender
Reshaping the front fender and side panels with a grinder
Painting the gas tank, fenders and side panels
Find a new round mirror
Removing the fuse box from the handlebar
New handle bar, this one is crooked
New speedo en tacho meters
Shortening the exhaust or a new slip-on
powder coating the wheels white
new tires
reshaping the seat
and some more :)